WICTEC 50 HI - Passive House Curtain Wall
Without an active heating system, a passive building depends heavily on the thermal insulation and airtightness of its facade, two key elements of its passivity. The WICTEC 50HI range (for High Isolation) is based on WICONA's standard offer to provide construction professionals with a facade solution in aluminum and glass certified passive building. Based on classic references, which present at least two major advantages, one aesthetic, the other financial. Indeed, by adopting the WICTEC 50 system, the WICTEC 50HI range is suitable for the construction of passive buildings at a lower additional cost. The thermal insulation even exceeds the benchmark requirements of a passive building, with a Uf value of 0.65 W / (m²K). These exceptional results are possible thanks to the use of triple glazing and easy-to-install thermal break profiles. On the aesthetic level, the pure and uniform lines of the facades are preserved. The passive building curtain wall system WICTEC 50HI is certified by the IFT Institute Rosenheim (Window Technical Institute) as a component for passive buildings according to the IFT Guidance Document RI WA 15/1, with a Ucw value of 0.7 W / (m²K).
Documentation
Documents
Characteristics
System test results / CE product pass in accordance with DIN EN 13830
Air permeability
Water tightness
Resistance to wind load
Sound insulation
Impact resistance
Burglar resistance
Quality assurance
Environmental management
Class AE
RE 1200
2000 / –3200 Pa, security 3000 / –4800 Pa
Rw (C;Ctr) = 47 (–1; –4) dB
Class E5 / I5
RC1
Certified according to ISO 9001:2008
Certified according to ISO 14001
Technical performance
System technology
System Overview of WICTEC 50 HI
- Optimized thermally insulated version of the standard WICTEC 50 facade
- Certified by the IFT Institute Rosenheim as a component for passive buildings according to the IFT Guidance Document RI WA 15/1, with a Ucw value of 0.7 W / (m²K)
- Triple glazing suitable for passive buildings, with an infill thickness of up to 63 mm
- Thermally improved insulating profiles for retrofitting
- System construction identical to the standard WICTEC 50 facade
- Perfect for vertical and polygonal facades, sloped glazing and spatial structures
- Personalized design thanks to a wide choice of aesthetic profiles
- Reliable load transmission for glazing (up to 6.0 kN), with suitable cross member junction principle
- Drainage by reliable overlap at the crossing point, without mechanical treatment of the uprights, for a tested and guaranteed tightness
- Uniform appearance of interior joints
- Large choice of structural profiles, with optional full reinforcements, for optimum performance
