Curtain wall SG design
Reduced profile elevations leading to maximum transparency:
With its integrated pressure profile WICTEC 50 offers an inexpensive solution with a design similar to structural glazing. The glazing technology with a flush or low pressure profile the assembly is as fast and easy as for a classic stick system curtain wall.
Technical Performance
System width: | 50 mm |
External profile width: | 43 mm / 51 mm |
Thermal insulation: | 22 mm to 38 mm 26 mm to 42 mm for stepped glass edge |
Basic system: | WICTEC 50 |
System technology:
- Minimised visibility due to profile dimensions of only 43 mm or 51 mm pressure profile width
- Two options: with only 4 mm overlap over the glass or completely flush with processed glass edge
- Simplified standard construction with design similar to structural glazing SG curtain walling
- Replaces the silicone joint of a classic SG system, thus no maintenance of bonding and sealing, no technical approval and no supervision of production necessary
- Production and assembly like for the Standard WICTEC 50 curtain wall
- Overlapping and secure drainage at the cross point, without mechanical mullion processing, ensures tried-and-tested impermeability
- Filigree look without any change in appearance to the inner mullion and transom gaskets
- Broad selection of profiles enables economic Adaptation to structural requirements, with the additional Option of internal reinforcement
System test results / CE product pass in accordance with DIN EN 13830
Air permeability: | Class AE |
Watertightness: | RE 1200 |
Resistance to wind load: | 2000 / -3200 Pa, security 3000 / -4800 Pa |
Impact resistance: | Class E5 / I5 |
Burglar resistance: | RC1N |
Quality assurance: | Certified according to ISO 9001:2008 |