Passive house curtain wall
A passive house does not require an active heating system and therefore relies heavily on the thermal insulation and air-tightness of the façade. Based on the standard series, WICTEC 50 is certified for aluminium/glass façades suitable for passive houses at minimal additional cost. The thermal insulation is improved to passivehouse quality with a Uf value of 0.74 W/(m²K) when using triple glazing and an easy-to-install thermal break profile.
Technical Performance
System width: | 50 mm |
Basic system: | WICTEC 50 |
Thermal insulation: | Uf= 0,74 W/(m²K) |
Infill thickness: | 45 mm bis 51 mm |
Glass weight: | bis 5,6 kN |
Polygon façade: | bis ±5° |
System technology:
- Extension to WICTEC 50 with optimised thermal insulation
- Certified by the ift Rosenheim as a passive house component according to the ift guidance paper RI WA 15/1, with a Ucw value of 0.7 W/(m²K)
- Triplex glass construction suitable for passive houses, infill thickness from 45 mm to 51 mm
- Thermal break profile made of elastomer foam for posterior installation
- System construction identical to standard WICTEC 50
- Individual design thanks to a wide range of profile geometries for the structural and glazing profiles
- Reliable glass load transmission (up to 5.6 kN), with adapted transom-joint technology
- Overlapping and secure drainage at the cross point, without mechanical mullion processing, ensures tried-and-tested impermeability
- Filigree look without any change in appearance to the inner mullion and transom gaskets
- Broad selection of profiles enables economic adaptation to structural requirements, with the additional option of internal reinforcement
System test results / CE product pass in accordance with DIN EN 13830